View GKU90000_7577651.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sprague- goodman engineering bulletin sg-305j.1 supercedes sg -305h ceramic dielectric trimmer capacitors sprague-goodman electronics, inc. 1700 shames drive, westbury, ny 11590 tel: 516-334-8700 ?fax: 516-334-8771 e-mail: info@spraguegoodman.com
2 sprague-goodman electronics, inc., 1700 shames drive, westbur y , n y 11590 tel: 51 6 - 334-8700 f ax: 516 - 334-8771 e-mail: i n f o @ s praguegoodman.com ceramic dielectric trimmer ca p acitors sg-305j.1 surftri m sur f a ce mount gk r p series fea tures sealed for washability low mounting pr ofile. carrier and r eel packaging standar d. npo temperatur e coefficient (up to 10 pf max). self resonant fr equency above 1 ghz. 3 .2 x 2 . 5 x 1. 3 mm models capacitance carrier and (pf ) tcc q min reel pack min max (ppm / c) (1 mhz) model no. 3. 0 5 0 500 15 0 gk r p 5 r066 3.0 10 0 500 15 0 gk r p10066 5. 0 20 n750 500 15 0 gk r p20066 specific a tions operating t emperatu r e range: 4 0 c to +85 c v oltage rating: 2 5 vdc dielectric withstanding v oltage: 7 5 vdc insulation resistance: 10 4 megohms min t o r que: 10 to 1 5 0 g-cm (0.14 to 2. 1 oz-in) all dimensions ar e in / mm. unless otherwise specified, the tolerance on dimensions is 0.004 / 0.1. 7 .0 3 0 n750 500 150 gkrp 3 0066
sprague-goodman electronics, inc., 1700 shames drive, westbur y , n y 11590 tel: 51 6 - 334-8700 f ax: 516 - 334-8771 e-mail: i n f o @ s praguegoodman.com ceramic dielectric trimmer cap acitors sg-305j.1 3 capacitance carrier and (pf ) tcc q min color bulk pack reel pack min max (ppm / c) (1 mhz) code model no. model no . 1.7 3.0 0 300 500 brown gky3r000 gky3r066 2.5 6.0 0 300 500 blue gky6r000 gky6r066 3.0 10.0 n400 400 500 white gky10000 gky10066 5.0 20.0 n900 400 300 red gky20000 gky20066 6.0 30.0 n 1 200 500 300 green gky30000 gky30066 surftrim surf a ce mount gky standard series fea tures designed for r eflow soldering. a vailable in carrier and r eel packaging. carrier and r eel specifications on page 11. specific a tions operating t emperature range: 25 c to +85 c v oltage rating: 100 vdc dielectric withstanding v oltage: 220 vdc insulation resistance: 10 4 megohms min t o r que: 10 to 150 g-cm (0.14 to 2.08 oz-in) 3.2 x 4.5 x 1.8 mm models all dimensions ar e in / mm. unless otherwise specified, the tolerance on dimensions is 0.004 / 0.1. 0.043 1.1 max 0.071 1.8 0.067 1.7 0.02 0.5 0.12 3.0 +0.006 0.002 +0.15 0.05 0.18 4.5 0.13 3.2 0.04 0.9 0.0059 0.002 0.15 0.05 0.0047 0.002 0.12 0.05 0.018 0.45 ty p 0.059 1.5 0.071 1.8 0.02 0.6 0.02 0.6 +0 0.004 +0 0.1 0.031 0.78 0.02 0.6 +0 0.004 +0 0.1 dia rotor stator terminals approx. flush to mounting surface g k y _ _ _ 86 0.11 2.9 0.059 1.5 0.047 1.2 pad layout 0.047 1.2 0.03 0.8 0.02 0.6 0.03 0.8 0.02 0.6 0.065 1.65 0.02 0.6 0.13 3.3 0.047 1.2 0.047 1.2 pad layout 0.047 1.2 rotor stator 0.13 3.2 0.12 3.0 0.18 4.5 0.079 2.0 0.05 1.2 0.05 1.2 max 0.071 1.8 terminals approx. flush to mounting surface 0.02 0.5 0.026 0.65 0.075 1.9 0.067 1.7 g k y _ _ _ 00, 66 capacitance carrier and (pf ) tcc q min reel pack min max (ppm / c) (1 mhz) model no . 1.0 3 0 500 300 gky3r086 2.5 10 0 300 300 gky10086 4.5 20 n750 400 300 gky20086 4.5 30 n 750 500 300 gky30086 4.5 40 n750 500 300 gky40086 4.5 50 n750 500 300 gky50086 gky washable series fea tures designed for r eflow soldering. c arrier and r eel packaging. sealed for washability specific a tions operating t emperature range: 40 c to +85 c v oltage rating: 25 vdc dielectric withstanding v oltage: 75 vdc insulation resistance: 10 4 megohms min t o r que: 10 to 150 g-cm (0.14 to 2.08 oz-in) 3.2 x 4.5 x 1.8 mm models typ
4 sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 ?tel: 516-334-8700 ?fax: 516-334-8771 ?e-mail: info@ s praguegoodman.com ceramic dielectric trimmer capacitors sg-305j surftrim surface mount sealed construction features ?process seal provides protection against conta- minants (flux, solvents, etc.) during production. ?designed for flow and reflow soldering. ?available in carrier and reel packaging. all dimensions are in / mm. unless otherwise specified, the tolerance on dimensions is 0.004 / 0.1. specifications operating temperature range: ?5? to +85? (for expanded temperature range applications, consult factory.) voltage rating: 100 vdc dielectric withstanding voltage: 220 vdc insulation resistance: 10 4 megohms min torque: 15 to 100 g-cm (0.2 to 1.39 oz-in) capacitance carrier and carrier and carrier and (pf) tcc q min color bulk pack reel pack bulk pack reel pack bulk pack reel pack *min max (ppm / ?) (1 mhz) code model no. model no. model no. model no. model no. model no. 1.4 3.0 0 200 300** ?red dot gkg3r026 gkg3r066 gkg3r027 gkg3r067 gkg3r028 gkg3r068 2.0 6.0 0 200 500** blue gkg6r026 gkg6r066 gkg6r027 gkg6r067 gkg6r028 gkg6r068 3.0 10.0 0 300 500** white gkg10026 gkg10066 gkg10027 gkg10067 gkg10028 gkg10068 4.5 20.0 n900 300 500** red gkg20026 gkg20066 gkg20027 gkg20067 gkg20028 gkg20068 6.5 30.0 n1100 450 300 green gkg30026 gkg30066 gkg30027 gkg30067 gkg30028 gkg30068 15.0 50.0 n1700 500 300 orange gkg50h26 gkg50h66 gkg50h27 gkg50h67 gkg50h28 gkg50h68 ? marking on bottom of capacitor. * re-rated in 1994 for lower min capacitance. ** q at 10mhz 4 x 4.5 x 2.7 mm models rotor stator slots 0.02 0.5 0.02 0.5 x 0.11 ?0.008 2.7 ?0.2 dp 0.16 ?0.008 4.0 ?0.2 0.094 2.4 0.18 ?0.008 4.5 ?0.2 0.047 1.2 0.20 5.2 max 0.11 ?0.008 2.8 ?0.2 seal terminals approx. flush to mounting surface 0.055 1.4 dia typ 0.055 1.4 rotor stator 0.16 0.008 4.0 0.2 0.11 0.008 2.9 0.2 0.18 0.008 4.5 0.2 0.094 2.4 slots 0.02 0.5 0.02 0.5 x dp 0.28 0.02 7.0 0.5 seal dia 0.047 1.2 typ terminals approx. flush to mounting surface slots 0.02 0.5 0.02 0.5 x 0.11 ?0.008 2.7 ?0.2 0.18 ?0.008 4.5 ?0.2 0.055 1.4 dp 0.094 2.4 dia stator rotor terminals approx. flush to mounting surface 0.28 ?0.008 7.0 ?0.2 0.047 1.2 seal typ 0.16 ?0.008 4.0 ?0.2 0.120 0.006 3.05 0.15 0.079 2.0 typ 0.094 2.4 0.16 4.0 0.063 1.6 0.079 2.0 typ 0.063 1.6 0.16 4.0 0.063 1.6 0.079 2.0 typ dia pad layouts gkg _ _ _ 26, 66 gkg _ _ _ 28, 68 gkg _ _ _ 27, 67 gkg _ _ _ 26, 66 gkg _ _ _ 28, 68 gkg _ _ _ 27, 67 available without seal ?consult factory. carrier and reel specifications on page11. add ?7 to model no. for 700 / reel, ?5 for 2500 / reel. construction details of 4 x 4.5 mm gkg models model gkg __ __ __ 27 shown ?special ?rive assembly?with pointed spring fingers to engage rotor upper surface contour. spring fingers also provide proper tension for smooth torque and low resistance. ?special rotor with die-formed ?rive contour on upper surface. ?flat-lapped and lubricated surfaces join for reliable capacitance settings. ?special ceramic stator insert with metalized electrode. ?solid one-piece housing with integrally molded terminals and contact areas. central tubular column is spun-out into a flare after assembly to maintain built-in spring tension.
sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 ?tel: 516-334-8700 ?fax: 516-334-8771 ?e-mail: info@ s praguegoodman.com ceramic dielectric trimmer capacitors sg-305j 5 0.16 0.008 4.0 0.2 0.02 0.5 slots dp x 0.094 2.4 0.055 1.4 dia 0.039 1.0 dia (2 holes) 0.20 5.0 mounting hole layout 0.18 0.008 4.5 0.2 0.11 0.008 2.7 0.2 0.094 0.02 2.4 0.5 rotor 0.24 0.02 6.2 0.5 0.008 0.002 0.2 0.05 stator 0.03 0.7 0.05 0.004 1.2 0.1 typ 0.02 0.5 typ 0.02 0.5 slots dp 0.02 0.5 x 0.094 2.4 0.055 1.4 dia 0.16 0.008 4.0 0.2 0.079 0.008 2.0 0.2 0.11 0.008 2.7 0.2 0.13 0.02 3.4 0.5 0.18 0.008 4.5 0.2 0.039 1.0 dia (2 holes) 0.148 3.75 mounting hole layout 0.03 0.7 0.008 0.002 0.2 0.05 typ stator 0.148 .01 3.75 0.3 0.21 0.02 5.3 0.5 rotor 0.094 0.02 2.4 0.5 0.063 0.008 1.6 0.2 features ?very low cost due to automated production and solderless touch contact construction. ?wide selection of capacitance ranges. ?color coded housings. ?easy blind tuning (2 slots at 90 angle in adjust cavity ?accepts cross-slotted tool). ? process seal on adjust screw access face (optional) provides protection against contaminants (flux, solvents, etc.) during production. 4 x 4.5 mm models 1 re-rated in 1993. 2 marking on bottom of capacitor. capacitance top mount 3 top mount 3 top mount 4 (pf) tcc q min color spring lead model no. spring lead model no. ammo pack model no. 1 min max (ppm / ?) 1 mhz 10 mhz code unsealed sealed unsealed sealed unsealed 1.4 3.0 0 200 300 300 2 red dot gkg3r021 gkg3r071 gkg3r024 gkg3r074 gkg3r025 2.0 6.0 0 200 500 300 blue gkg6r021 gkg6r071 gkg6r024 gkg6r074 gkg6r025 3.0 10.0 0 300 500 300 white gkg10021 gkg10071 gkg10024 gkg10074 gkg10025 4.5 20.0 n900 350 500 300 red gkg20021 gkg20071 gkg20024 gkg20074 gkg20025 6.5 30.0 n1100 450 300 300 green gkg30021 gkg30071 gkg30024 gkg30074 gkg30025 15.0 50.0 n1700 500 300 n.a. orange gkg50021 gkg50071 gkg50024 gkg50074 gkg50025 specifications operating temperature range: ?5? to +85? voltage rating: 100 vdc dielectric withstanding voltage: 220 vdc insulation resistance: 10 4 megohms min torque: 10 to 100 g-cm (0.14 to 1.39 oz-in) all dimensions are in / mm. tape dimensions on page 3. unless otherwise specified, the tolerance on dimensions is 0.004 / 0.1. plastic encased type: 4 x 4.5 mm available with or without adjust cavity seal gkg _ _ _ 21, 71 gkg _ _ _ 24, 74 3 magazine pack (120 pieces) for auto insertion available ?consult factory for pricing. 4 ammo pack contains 1000 pcs. 0.16 0.008 4.0 0.2 0.02 0.5 slots dp x 0.094 2.4 0.055 1.4 dia 0.18 0.008 4.5 0.2 0.11 0.008 2.7 0.2 rotor stator 0.02 0.5 0.079 0.008 2.0 0.2 0.047 1.2 view a-a (rotor) aa 0.063 0.008 1.6 0.2 gkg _ _ _ 25 0.152 0.03 3.85 0.8 0.02 0.002 0.5 0.05 0.500 0.04 12.7 1 0.06 1.5 max 0.024 0.01 0.60 0.3 dia 0.35 0.02 9.0 0.5 0.16 0.008 4.0 0.2 dia 0.2 5.0 min 0.650 16.5 +0.06 ? +1.5 ? 0.71 18 +0.04 0.02 +1 0.5 0.2 0.002 5.0 0.05 0.500 0.01 12.7 0.3 0.059 1.5 +0.020 ? +0.5 ? gkg _ _ _ 25 tape dimensions
6 sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 ?tel: 516-334-8700 ?fax: 516-334-8771 ?e-mail: info@ s praguegoodman.com ceramic dielectric trimmer capacitors sg-305j 0.02 0.5 slots dp min 0.02 0.5 x 0.098 ?0.01 2.5 ?0.3 dia 0.14 ?0.008 3.5 ?0.2 max cap indication 0.25 6.3 max 0.21 ?0.12 5.3 ?0.5 0.12 ?0.02 3.0 ?0.5 0.25 6.3 max 0.02 0.5 0.051 1.3 dia (2 holes) 0.20 5.0 mounting hole layout rotor 0.008 ?0.002 0.2 ?0.05 stator 0.26 ?0.02 6.6 ?0.5 0.079 ?0.008 2.0 ?0.2 0.039 1.0 typ features ?low cost due to automated production and sol- derless touch contact construction. ?wide selection of capacitance ranges. ?color coded housings. ?double plastic housing provides improved protec- tion against dust & contamination. ?rugged construction (working parts supported by metal structure, not just plastic). ?easy blind tuning (2 slots at 90 angle in adjust cavity ?accepts cross-slotted tool). visual indication of maximum capacitance setting. ?membrane seal on adjust screw access face (optional) provides protection against contami- nants (flux, solvents, etc.) during production. top mount top mount capacitance (pf) spring lead model no. straight lead model no. min max tcc (ppm / c) q min (10 mhz) color code unsealed sealed unsealed sealed 2.8 10.0 0 250 300 white gkg10011 gkg10051 gkg10012 gkg10052 4.0 20.0 n600 300 300 red gkg20011 gkg20051 gkg20012 gkg20052 5.5 30.0 n750 300 200 green gkg30011 gkg30051 gkg30012 gkg30052 6.5 40.0 n750 400 200 yellow gkg40011 gkg40051 gkg40012 gkg40052 8.0 50.0 n1200 600 200 orange gkg50011 gkg50051 gkg50012 gkg50052 10.5 60.0 n1200 600 200 (1 mhz) brown gkg60011 gkg60051 gkg60012 gkg60052 12.0 70.0 n1500 600 200 (1 mhz) grey gkg70011 gkg70051 gkg70012 gkg70052 20.0 90.0 n2200 600 200 (1 mhz) black gkg90011 gkg90051 gkg90012 gkg90052 all dimensions are in / mm. unless otherwise specified, the tolerance on dimensions is 0.004 / 0.1; except slot tolerance is 0.008 / 0.2. 6 mm models specifications operating temperature range: ?5? to +85? voltage rating: 100 vdc dielectric withstanding voltage: 220 vdc insulation resistance: 10 4 megohms min torque: 20 to 200 g-cm (0.28 to 2.77 oz-in) plastic encased type: 6 mm available with or without membrane adjust cavity seal 0.02 0.5 slots dp min 0.02 0.5 x 0.098 ?0.01 2.5 ?0.3 dia 0.079 ?0.008 2.0 ?0.2 max cap indication stator 0.20 ?0.02 5.2 ?0.4 typ rotor 0.008 ?0.002 0.2 ?0.05 0.25 6.3 max 0.02 0.5 0.14 ?0.008 3.5 ?0.2 0.21 ?0.02 5.3 ?0.5 0.13 ?0.02 3.4 ?0.5 0.039 1.0 mounting hole layout 0.20 5.0 0.047 1.2 dia (2 holes) 0.25 6.3 max construction details of 6 mm gkg models gkg _ _ _ 12, 52 cage ring with spring fingers metal rotor metalized ceramic sta- tor molded plastic inner housing sub-assembly stator terminal and contact rotor terminal and cage plastic outer housing caged sub-assembly completed assembly gkg _ _ _ 11, 51
sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 ?tel: 516-334-8700 ?fax: 516-334-8771 ?e-mail: info@ s praguegoodman.com ceramic dielectric trimmer capacitors sg-305j 7 0.2 5.0 suggest mounting hole layout 0.0098 0.25 0.24 0.008 6.0 0.2 0.24 0.008 6.0 0.2 0.16 0.008 4.0 0.2 0.098 0.008 2.5 0.2 0.02 0.008 0.6 0.2 0.008 0.2 0.24 0.008 6.0 0.2 color code 0.04 0.002 1.0 0.05 typ dia 0.20 5.0 0.047 1.2 dia (2 plcs) ~ 0.13 3.3 dia 0.02 0.5 x dp 0.059 1.5 rotor stator 0.2 5.0 suggest mounting hole layout 0.0098 0.25 0.24 0.008 6.0 0.2 0.24 0.008 6.0 0.2 0.16 0.008 4.0 0.2 0.098 0.008 2.5 0.2 0.008 0.2 color code 0.13 3.3 0.04 0.002 1.0 0.05 typ dia 0.25 6.3 0.047 1.2 dia 0.12 3.0 dia ~ (2 plcs) 0.02 0.008 0.6 0.2 0.02 0.5 x dp dia rotor stator gkg _ _ _ 16 gkg _ _ _ 15 all dimensions are in / mm. unless otherwise specified, the tolerance on dimensions is 0.004 / 0.1; except slot tolerance is 0.008 / 0.2. features ?very low cost. ?wide selection of capacitance ranges. ?suitable for printed circuit production methods using ?pring leads or ?traight leads . specifications operating temperature range: ?5? to +85? voltage rating: 100 vdc dielectric withstanding voltage: 220 vdc insulation resistance: 10 4 megohms min torque: 15 to 150 g-cm (0.21 to 2.1 oz-in) capacitance (pf) top adjust bottom adjust min max tcc (ppm / c) q min (1 mhz) color code model no. model no. 1.0 3.0 npo 250 300 black gkg3r015 gkg3r016 2.0 5.0 npo 250 300 blue gkg5r015 gkg5r016 3.0 10.0 npo 250 300 white gkg10015 gkg10016 5.0 20.0 n750 250 300 red gkg20015 gkg20016 6.5 30.0 n1000 500 200 green gkg30015 gkg30016 7.0 40.0 n2200 800 200 yellow gkg40015 gkg40016 10.0 50.0 n2200 800 200 brown gkg50015 gkg50016 12.0 60.0 n2200 800 200 brown gkg60015 gkg60016 15.0 70.0 n2200 800 200 brown gkg70015 gkg70016 6 mm economy models plastic encased type: 6 mm economy gkg series
8 sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 ?tel: 516-334-8700 ?fax: 516-334-8771 ?e-mail: info@ s praguegoodman.com ceramic dielectric trimmer capacitors sg-305j capacitance range (pf) tcc q min color code min max (ppm / ?) (10 mhz) or mark model no. 1.5 ? 5.5 0 250 300 black gku4r000 2.0 ? 8.0 n100 200 300 red gku6r000 2.8 ? 12.0 n600 300 300 none gku10000 3.3 ?? 20.5 n800 300 300 blue gku18000 3.8 ? 28.5 n1350 650 200 purple gku25000 4.5 30.0 n1350 650 200 orange gku30000 5.0 40.0 n1600 800 200 brown gku40000 6.0 50.0 n1300 500 150 (1mhz) green gku50000 7.0 60.0 n1300 500 150 (1mhz) pink gku60000 15.0 90.0 n1500 800 100 (1mhz) none GKU90000 5 mm rugged models ? re-rated in 1992 ?? re-rated in 1986 0.13 3.4 0.23 5.8 0.20 5.2 stator 0.051 1.3 0.20 5.0 0.039 1.0 (2 holes) 0.22 5.5 0.02 0.5 slot dia mounting hole layout 0.12 0.02 3.0 0.5 max rotor 0.02 0.5 dp x 0.010 0.25 0.006 0.15 gku _ _ _ 00 specifications operating temperature range: ?5? to +125? voltage rating: 250 vdc at 85? 125 vdc at 125? dielectric withstanding voltage: 500 vdc at 85? 250 vdc at 125? insulation resistance: 10 4 megohms min torque: 30 to 140 g-cm (0.42 to 1.94 oz-in) rugged 5 mm gku series features ?proven rugged axle design prevents electrode shifting, maximizes stability. ?plastic washer between adjust shaft and ceramic rotor to absorb tuning and environmental stresses. ?special ceramic dielectric rotor with metalized electrode. ?flat-lapped and lubricated surfaces join for reliable capacity settings. ?solid one-piece stator electrode and terminal, recessed and integral with base. cannot shift. improves stability and resistance to humidity. ?combination spring/contact/terminal maintains proper tension for smooth torque and low resis- tance. ?soldered connection between adjust shaft and rotor electrode eliminates contact resistance problems. ?compact form factor conserves mounting space. ?straight line capacitance curve. ?low cost for industrial and commercial applications. all dimensions are in / mm. unless otherwise specified, the tolerance on dimensions is 0.004 / 0.1.
sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 ?tel: 516-334-8700 ?fax: 516-334-8771 ?e-mail: info@ s praguegoodman.com ceramic dielectric trimmer capacitors sg-305j 9 all dimensions are in / mm. unless otherwise specified, the tolerance on dimensions is 0.004 / 0.1. capacitance range (pf) min max tcc (ppm / ?) q min (1 mhz) model no. 2.0 5.0 0 250 300 gkt5r010 3.0 10.0 0 250 300 gkt10010 4.0 20.0 n750 250 300 gkt20010 5.0 30.0 n1000 500 300 gkt30010 7.0 45.0 n1000 500 200 gkt45010 9.0 63.0 n1000 500 200 gkt60010 12.0 90.0 n2200 800 200 gkt90010 14.0 108.0 n2200 800 100 gkt10110 7 mm economy models 0.28 7.0 stator 0.047 1.2 (3 plcs) 0.02 0.6 dia mounting hole layout rotor (2 plcs) 0.02 0.6 dp x 0.040 1.0 0.010 0.25 0.28 0.008 7.0 0.2 0.15 0.008 3.7 0.2 0.15 0.008 3.7 0.2 0.010 0.25 slot 0.43 0.008 11.0 0.2 0.14 3.5 0.04 0.002 1.0 0.05 solder gkt _ _ _ 10 specifications operating temperature range: ?5? to +85? voltage rating: 250 vdc dielectric withstanding voltages: 500 vdc insulation resistance: 10 4 megohms min torque: 35 to 200 g-cm (0.49 to 2.8 oz-in) capacitance range (pf) min max tcc (ppm / ?) q min (1 mhz) model no. 1.0 3.0 0 250 300 gku3r010 2.0 6.0 0 250 300 gku6r010 3.0 10.0 n750 250 300 gku10010 4.8 20.0 n750 250 300 gku20010 5.5 30.0 n1000 250 200 gku30010 6.8 40.0 n2200 800 200 gku40010 9.8 50.0 n2200 800 200 gku50010 12.0 60.0 n2200 800 200 gku60010 14.0 70.0 n2200 800 200 gku70010 5 mm economy models
10 sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 ?tel: 516-334-8700 ?fax: 516-334-8771 ?e-mail: info@ s praguegoodman.com ceramic dielectric trimmer capacitors sg-305j all dimensions are in / mm. unless otherwise specified, the tolerance on dimensions is 0.004 / 0.1. features ?very small size ?for hybrid circuit applications. ?straight line capacitance curve. ?choice of mounting styles. capacitance (pf) min max tcc (ppm / ?) q min (1 mhz) model no. model no. 1.0 3.0 0 300 200 gkx3r010 gkx3r011 1.5 5.0 0 300 200 gkx5r010 gkx5r011 2.5 10.0 0 300 200 gkx10010 gkx10011 5.0 20.0 n750 500 200 gkx20010 gkx20011 5.0 30.0 n750 500 200 gkx30010 gkx30011 5.0 35.0 n750 500 200 gkx35010 gkx35011 6.0 40.0 n750 500 200 gkx40010 gkx40011 3.0 x 1.8 mm models thin 2 mm & 3 mm types specifications operating temperature range: ?5? to +85? voltage rating: 25 vdc dielectric withstanding voltages: 75 vdc insulation resistance: 10 4 megohms min torque: 10 to 75 g-cm (0.14 to 1.0 oz-in) terminal plating: silver 0.079 2.0 dia 0.33 8.5 0.03 0.8 typ 0.12 0.01 3.0 0.2 dia 0.02 0.014 0.5 0.35 dp slot 0.006 0.15 stator rotor 0.005 0.12 0.071 1.8 max x dia 0.03 0.8 typ 0.12 0.01 3.0 0.2 dia 0.02 0.014 0.5 0.35 dp slot 0.071 1.8 0.079 2.0 max 0.006 0.15 0.2 0.02 5.0 0.5 0.005 0.12 0.144 0.02 3.65 0.5 typ 0.039 1.0 dia typ 0.2 0.02 5.0 0.5 mounting hole layout x gkx _ _ _ 10 gkx _ _ _ 11 capacitance (pf) min* max tcc (ppm / ?) q min (1 mhz) model no. 5.0 25.0 n1200 800 100 gkh25000 miniature series 2.0 x 1.2 mm models slot 0.012 0.25 0.007 0.18 x stator dp 0.005 0.12 rotor 0.047 1.2 max 0.091 2.3 dia max 0.03 0.8 0.19 4.8 0.03 0.7 typ gkh _ _ _ 00 *re-rated in 1996
ceramic dielectric trimmer capacitors sg-305j.1 carrier and reel specifications dimension a b c d e f g h k l m n p 0.004 0.004 0.01 0.004 0.004 0.004 0.004 0.004 0.008 0.002 0.004 0.004 0.004 product tolerance ? ? ? ? ? ? ? ? + ? ? ? line 0.1 0.1 0.3 0.1 0.1 0.1 0.1 0.1 0.2 0.05 0.1 0.1 0.1 0.18 0.21 0.47 0.22 0.069 0.31 0.08 0.2 0.13 0.01 0.059 gkg_ _ _ 66 fig. 2 ? 4.5 5.4 12 5.5 1.75 8.0 2 4 3.2 0.3 1.5 0.18 0.30 0.47 0.22 0.069 0.31 0.08 0.2 0.13 0.01 0.059 0.08 0.2 gkg_ _ _ 67, 68 fig. 1 ? ? ? - ? ? ? 4.5 7.5 12 5.5 1.75 8.0 2 4 3.2 0.3 1.5 2.0 5 0.11 0.13 0.47 0.22 0.069 0.16 0.08 0.2 0.075 0.01 0.059 gkrp_ _ _ 66 fig. 2 ? ? ? ? 2.7 3.2 12 5.5 1.75 4.0 2 4 1.9 0.3 1.5 0.14 0.19 0.47 0.22 0.069 0.31 0.08 0.2 0.091 0.01 0.059 gky_ _ _ 66 fig. 2 ? ? ? ? ? ? ? ? ? 3.6 4.9 12 5.5 1.75 8.0 2 4 2.3 0.3 1.5 0.132 0.185 0.47 0.22 0.069 0.31 0.08 0.2 0.094 0.01 0.059 gky_ _ _ 86 fig. 2 ? ? ? ? ? ? ? ? ? 3.35 4.70 12 5.5 1.75 8.0 2 4 2.4 0.3 1.5 all dimensions are in / mm. unless otherwise specified, the tolerance on dimensions is 0.004 / 0.1. gkg and gky_ _ _66 series capacitors are positioned in compartments (blisters) with the stator terminal closer to the "m" holes . to get the parts with the rotor terminal closer to the "m" holes, add an "a" suffix to the model number. gkrp and gky_ _ _86 series capacitors are positioned in compartments (blisters) with the rotor terminal closer to the "m" holes . to get the parts with the stator terminal closer to the "m" holes, add an "a" suffix to the model number. dimension abcde tw qu antity per 0.1 0.1 0.04 0.08 0.04 0.02 0.08 product tolerance reel - - - line 331210.52 7.09 2.4 0.51 0.91 0.08 0.043 0.531 gkg_ _ _ 66-07, 67-07, 700 - - - - ? 68-07 180 60 13 23 2 1.1 13.5 13.0 3.1 0.51 0.91 0.098 0.079 0.531 gkg_ _ _ 66-25, 67-25, 2500 - ? ? ? ? 68-25 330 80 13 23 2.5 2.0 13.5 7.09 2.4 0.51 0.83 0.08 0.047 0.512 gkrp_ _ _ 66 2000 - - - - - 180 60 13 21 2 1.2 13.0 7.09 2.4 0.51 0.91 0.08 0.043 0.531 gky_ _ _ 66 1000 - - - - - 180 60 13 23 2 1.1 13.5 7.09 2.4 0.51 0.83 0.08 0.047 0.512 gky_ _ _ 86 1000 - - - - - 180 60 13 21 2 1.2 13.0 c d e b a t w - 0 carrier reel 11 sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 ?tel: 516-334-8700 ?fax: 516-334-8771 all dimensions are in / mm. unless otherwise specified, the tolerance on dimensions is 0.004 / 0.1. fig. 1 n e m dia a c d p b f g h 0.12 3.0 typ 0.03 0.8 typ 0.14 3.6 fig. 2 e g h m dia a c d b f cover tape end view 0.003 0.075 thk k l 0.14 3.6 0.12 3.0 typ 0.03 0.8 typ gkg _ _ _ 66 gkg _ _ _ 67, 68 embossment details
?2000 sprague-goodman electronics, inc., all rights reserved. printed in the u.s.a. 50003 sprague-goodman electronics, inc. 1700 shames drive, westbury, ny 11590 tel: 516-334-8700 ?fax: 516-334-8771 e-mail: info@spraguegoodman.com website: http://www.spraguegoodman.com specification notes 1. parts are 100% tested for capacitance range, dielectric withstanding voltage, insulation resis- tance, and torque. 2. capacitance range specified is that which is guar- anteed, and is measured at 1 mhz and 25?. 3. for soldering surftrim surface mounting models, pre-heat at 140? ?0? for 2 minutes maximum, and reflow solder at 240? ?? for 20 seconds maximum. 4. for soldering printed circuit board mounting mod- els, solder at 260? ?0? for 5 seconds maximum, except 3 seconds maximum for miniature models (page 10). 5. q factor is measured at maximum rated capaci- tance and at room temperature. frequency of measurement is as listed for each model. 6. dielectric strength is measured at maximum rated capacitance and room temperature, with test volt- age as listed for each model applied for 5 seconds. 7. insulation resistance is measured at maximum rated capacitance and room temperature and at rated voltage, unless otherwise specified. 8. temperature coefficient of capacitance (tcc) is measured at 100 khz or 1 mhz, over a temperature range of ?0? to +70? with capacitor set at maxi- mum rated capacitance. 9. axial load during tuning should not exceed 250 grams. 10. capacitors should not be operated outside of rated capacitance range and working voltage. 11. angular orientation of adjusting slot is random. application notes soldering and cleaning of ceramic trimmer capacitors soldering temperatures and times are specified in notes 3 and 4 above. if using an iron for manual sol- dering (for prototyping or repairs, for example) use an appropriate size and temperature so that the high temperature exposure of the trimmer is less than 3 seconds. we strongly recommend the use of water soluble fluxes for soldering, followed by cleaning in water containing detergents, and then a clear water rinse. some operations still use freon or similar fluorinated or chlorinated hydrocarbon solvents. these solvents have a tendency to remove the lubricant, which in turn makes for bumpy adjustment, and will degrade the tuning torque, adjustment life, and other mechanical specifications. in general, the minimum exposure to cleaning solu- tions is recommended. the gentlest would be the detergent and water rinses at fairly low tempera- tures. when chlorinated or fluorinated hydrocarbons are used, the boards should never be plunged into the solvent solution, but rather maintained in the vapor area of the defluxing equipment, and for the minimum possible time. most desirable would be to clean only the bottom of the printed circuit board, as with board scrubbers. the unsealed gkg models are usually specified for consumer applications where cleaning after soldering is normally not required. should cleaning be required, the method to use would be to clean the bottom of the board, as with board scrubbers. if a solvent is used when cleaning the gkg series, sealed versions should be specified to prevent the solvent from being trapped in the housing and degrading performance. other precautions for using ceramic trimmer capaci- tors include: ?beware of excessive handling with bare hands as, ?inger oil?and dirt can bring down q and insulation resistance values. ?terminals should not be cut or reformed, as this could cause deformation of the spring or break- ing of the rotor. ceramic dielectric trimmer capacitors sg-305j

▲Up To Search▲

Price & Availability of GKU90000

	To Download GKU90000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .